Fagor CNC 8060 - Page 867

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·867·
Variables related to the programmed functions.
On angular (swivel) spindle heads, there are 2 possible solutions when calculating this target
position. These variables indicate the solution that involves the longest movement of the main
rotary axis with respect to the zero position.
INCLINED PLANES.
(V.)[ch].G.CS
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Report variable (to be used from the scripts).
Number of the active CS function.
Syntax.
·ch· Channel number.
(V.)[ch].G.ACS
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Report variable (to be used from the scripts).
Number of the active ACS function.
Syntax.
·ch· Channel number.
(V.)[ch].G.TOOLCOMP
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Longitudinal compensation function active.
Syntax.
·ch· Channel number.
Values of the variable.
This variable returns one of the following values.
DIE RESULTING FROM THE INCLINED PLANE.
(V.)[ch].G.CSMAT1
(V.)[ch].G.CSMAT2
(V.)[ch].G.CSMAT3
(V.)[ch].G.CSMAT4
(V.)[ch].G.CSMAT5
(V.)[ch].G.CSMAT6
(V.)[ch].G.CSMAT7
V.[2].G.CS Channel ·2·.
V.[2].G.ACS Channel ·2·.
V.[2].G.TOOLCOMP Channel ·2·.
Value. Meaning.
1RTCP.
2TLC.
3 None.