Fagor CNC 8060 - Page 894

·894·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables associated with the part-program being executed.
(V.)[ch].G.BLKSKIP
Variable that can be read and written from the interface and read from the program and from the PLC.
The variable returns the execution value; reading it interrupts block preparation.
Block skip function ( \ ) activated.
Syntax.
·ch· Channel number.
Remarks.
The "block skip" function is selected from the PLC using the BLKSKIP1 mark.
(V.)[ch].G.M01STOP
Variable that can be read and written from the interface and read from the program and from the PLC.
The variable returns the execution value; reading it interrupts block preparation.
Conditional stop function (M01) activated.
Syntax.
·ch· Channel number.
Remarks.
The "conditional stop" function is activated from the PLC using the M01STOP mark.
(V.)[ch].G.RAPID
Variable that can be read and written from the interface and read from the program and from the PLC.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
"Rapid traverse" function activated.
Syntax.
·ch· Channel number.
Remarks.
The "rapid traverse" function is selected from the PLC using the MANRAPID mark.
V.[2].G.BLKSKIP Channel ·2·.
V.[2].G.M01STOP Channel ·2·.
V.[2].G.RAPID Channel ·2·.