Fargo DTC4500e User Manual

DTC4500e_User Guide_EN, PLT-01669, Rev. 1.1
Page 2 April 2014
Copyright
©2014 HID Global Corporation/ASSA ABLOY AB.
All rights reserved. This document may not be reproduced, disseminated or republished in any form without
the prior written permission of HID Global Corporation.
Trademarks
HID GLOBAL, HID, the HID logo, iCLASS, iCLASS SE, OMNIKEY, and Seos are the trademarks or registered
trademarks of HID Global Corporation, or its licensors, in the U.S. and other countries.
MIFARE, MIFARE DESFire and MIFARE DESFire EV1 are registered trademarks of NXP B.V. and are used
under license.
Revision History
Version Date Description
1.1 April 2014 Deleted Swift ID, updated formatiing and safety symbols.
1.0 December 2013 Initial release of document
HID Global Customer Support
North America Europe, Middle East and Africa
HID Corporate
611 Center Ridge Drive
Austin, TX 78753
866 607-7339, #6
M-F 7am-6pm CST
Phoenix Road
Haverhill, Suffolk CB9 7AE
England
+44 1440 711 822
M-F 9am – 5pm GMT
F 8:30 – 17:00 GMT
Asia Pacific Brazil
19/F 625 King’s Road
North Point, Island East
Hong Kong
852 3160 9833
M-F 9am – 6pm GMT +8
Av Guido Caloi 1985 Prédio 18
São Paulo – SP
CEP : 05802-140
55 11 5514-7110
M-F 9am – 6pm ATC
support.hidglobal.com

Fargo DTC4500e Specifications

General

Print Technology	Dye-Sublimation / Resin Thermal Transfer
Resolution	300 dpi
Supported Card Sizes	CR-80, CR-79 adhesive back
Memory	32 MB RAM
Operating System Supported	Windows 7, 8, 10, Server 2008, 2012, 2016
Print Speed	Up to 225 cards per hour (YMCKO)
Card Capacity	100 cards
Connectivity	USB 2.0, Ethernet
Print Capability	Single-sided or dual-sided printing
Power Requirements	100-240V AC, 50/60Hz
Operating Humidity	20-80% RH
Card Thickness	9 mil to 40 mil
Operating Temperature	65° F to 90° F / 18° C to 32° C