Fargo DTC4500e - Resin Heat, Back (K); Overlay Heat (O); Default

DTC4500e_User Guide_EN, PLT-01669, Rev. 1.1
April 2014 Page 53
4.8.2.3 Resin Heat, Back (K)
Move the slider to the left to use less heat in the printing process, resulting in a lighter or less
saturated print. Move the slider to the right to use more heat, resulting in a darker or more saturated
print.
4.8.2.4 Overlay Heat (O)
Move the slider to the left to use less heat in the printing process. Move the slider to the right to use
more heat.
4.8.3 Default
Click the Default button to return all options to their factory settings.