Faro Focus Premium - Nameplate Symbols

l Only replacement parts authorized by FARO may be used, and in accordance with the instructions
provided by FARO.
l Do not expose the FAROFocus Premium and its accessories to extreme temperatures. The ambient
temperature must not be lower or higher than given in the specifications. Do not use the FAROFocus
Premium near heat sources, such as radiators, heat registers, or other heat-producing products
(including amplifiers).
l Do not immerse the FAROFocus Premium and its accessories in water. Liquid inside the product
enclosure can lead to damage, fire, or electric shocks.
l Properly dispose of the product and batteries in accordance to the local and national regulations. For
more information, see Disposal on page139.
l Do not use the FAROFocus Premium and its accessories in an explosive environment. Do not
operate the instrument in the presence of flammable gases or fumes. Operation of any electrical
instrument in such an environment constitutes a safety hazard.
l Do not use the FAROFocus Premium in the vicinity of strong magnetic or electrical fields.
l Before operating the FAROFocus Premium and its accessories in hazardous areas, contact the local
safety authorities and safety experts.
l For outdoor use, use the PowerBlock battery as the power supply, ensuring that the device is
protected from rain or spray water. Use the scanner in a non-condensing environment.
l When the product is transferred from a cold to a significantly-warmer environment, water may
condense on some elements inside the scanner. To avoid this, place the scanner in an airtight plastic
bag before transfer. This allows the condensation to form on the bag rather than inside the scanner. If
you cannot pack the scanner in an airtight manner, wait until observable condensation water
evaporates from the scanner before switching the FAROFocus Premium on.
l If the scanner becomes wet, let it dry completely before placing it in the transport case. Ensure that
the foam in the case never gets wet while unpacking or packing the scanner.
DANGER: Do not operate the scanner while the external power supply is plugged in. The power cable
might damage the turning scanner.
Nameplate symbols
Indicates conformity with health, safety, and environmental protection standards for products
sold within the European Economic Area.
Indicates that the product should not be discarded as unsorted waste but must be sent to
separate collection facilities for recovery and recycling.
FARO
®
Focus Premium Laser Scanner User Manual
Chapter 3: Safety Precautions
FARO Focus Premium (March 2022) Page9of157