Faro Focus Premium - Tips for Using the Battery

NOTICE: Check the PowerDock for damage before use, being sure to check that the safety clamps
have not been damaged, which can occur if the PowerDock falls while holding a
PowerBlock.
Figure 5-4 Undamaged vs damaged safety latch
① Undamaged safety latch - Note the vertical position.
② Damaged safety latch - Note the slanted position.
NOTICE: Do not use a damaged PowerDock. Doing so may damage the PowerBlock.
Tips for Using the Battery
l Charge the battery the day of use, or the day before. An unused, charged battery gradually loses its
charge.
l If the battery empties quickly after being fully-charged, replace it with a new one.
l For optimal battery performance, an ambient temperature of 0°C to +40°C (+32°F to +104°F) is
recommended. In colder or warmer locations, battery performance and operation time may temporarily
decrease and charge time may increase. If the battery temperature is too high, it may not charge at all
until the battery cools down.
FARO
®
Focus Premium Laser Scanner User Manual
Chapter 5: Getting Started
FARO Focus Premium (March 2022) Page28of157