Shutting Down the FAROFocus Premium
To shut down the FAROFocus Premium, press the Power On/Off button for about 3 seconds or tap the
Power button in the user interface drop-down list on the home screen. Confirm your intent to shut-down
the scanner by tapping in the dialog box on the screen. The top LED then starts blinking blue. As soon
as the FAROFocus Premium has finished shutting down, the LEDs stop blinking. You can then safely
remove the battery and the power-supply.
NOTICE: Damage to the scanner’s internal PC and data loss.
Do not turn-off the power to the FAROFocus Premium before the shut-down cycle is
complete.
The FAROFocus Premium has an integrated PC. This internal PC must be shut-down before
turning off the power-supply. If the power-supply is disconnected or switched off without
the FAROFocus Premium being previously shut-down, it can damage the internal PC and
might lead to a data loss.
If the FAROFocus Premium has not been properly shut down, the next boot process might
require more time than usual, because the FAROFocus Premium may need to check for
errors.
Pressing and holding for more than 10 seconds switches the FAROFocus Premium off without properly
shutting it down. Use this option only if the FAROFocus Premium will not shut down, such as due to
malfunction. Never remove the battery in case the scanner is unresponsive. Always use the above
mentioned method and press the top button until the scanner shuts down.
Powering Off the FAROFocus Premium
Once the FAROFocus Premium has been completely shut-down, remove the battery and secure the
equipment in protective cases.
1. To remove the battery:
2. Open the battery compartment cover.
3. Release the interlock mechanism of the battery.
4. Remove the battery.
5. Close the battery compartment cover.
FARO
®
Focus Premium Laser Scanner User Manual
Chapter 5: Getting Started
FARO Focus Premium (March 2022) Page53of157
To Next Page
Loading...
