Faro Focus Premium - Switching on the FARO Focus Premium; Initial Scanner Settings

Switching on the FAROFocus Premium
Pressing the scanner's On/Off button starts the boot process, indicated by the scanner LEDs blinking blue.
If power is supplied by the battery and its charge state is too low to start the scanner, the scanner LEDs
blink red.
When the FAROFocus Premium is ready, the LEDs stop flashing and illuminate a constantly blue. The
scanner controller software's home screen appears on the integrated touch screen.
Figure 5-9 Home Screen of the controller software
To operate, tap the elements on the screen with your fingers. You can also use a capacitive stylus to
navigate through the user interface.
Initial Scanner Settings
This chapter gives you a brief description on how to set up initial scanner settings using the scanner's
controller software on the integrated touch screen. See Controller Software on page54 for more
information.
FARO
®
Focus Premium Laser Scanner User Manual
Chapter 5: Getting Started
FARO Focus Premium (March 2022) Page36of157