Farr HD8625 - F. FAILURE OR DIFFICULTY OF TONG TO SHIFT

Technical Manual
hD8625 8-
5
/
8
” 35K Tong
4.7
TroubleshooTing
POSSIBLE PROBLEM SOLUTION(S)
1
Bentorbrokenshifterhandle Replaceshifterhandle
2 Bentorbrokenshifteryoke Inspectcomponentsthroughinspectiondoor.Replaceshifteryokeifnecessary.
3 Bentorbrokenshiftershaft Replace
4
Lockingnutsonshiftingshafthaveloosenedandposi-
tionofyokehaschanged
Repositionyokeandre-tightenlockingnuts
5 Shiftingyokehascomeloosefromshiftingshaft
Inspectyokeandinspectfordamage.Iffreeofdamage,replaceonshaftand
tightenlockingnuts
6 Tongpopsoutofgear Adjustshifterdetentforce(SeePg.3.8)
7 “Frozen”orhardtomoveshifterhandle
Lubricateshiftingshaft.Mayrequireshiftershaftremovalandcleaningofvar-
nishorotherdepositsontheshaft.
F. FAILURE OR DIFFICULTY OF TONG TO SHIFT