4-9
1
2
3
4
Settings Menu
[S6] Display
4-5 [S6] Display
This section explains how to set the display modes and received light amounts on the OLED display.
4-5-1 [S6] - [P1] Display mode
Sets how to show the received light amount on the OLED display.
Selectable Options
You can select from the following display modes.
Selectable option Function description
Value (default value) Displays the received light amount as a numeric value.
Percentage Displays the received light amount as a percentage (%) of the threshold.
This setting makes it easy to understand information such as differences in
received light amount between multiple amplifiers and daily changes.
Bar graph Displays the received light amount and one or more thresholds on a bar graph.
This setting makes it easy to check the threshold margin in relation to the received
light amount.
Counter
*1
Displays the set count and the present count in Counter mode.
Edge
*2
Displayed when Edge height is selected.
Displays the amount of change (difference) when the received light amount
changes.
*1: Displayed when “On” is selected in “[S7] - [D6] Counter”.
*2: Displayed when “Edge height” is selected in “[S7] - [D2] Threshold mode”.
Value
Displays the received light amount as a relative numeric value between 0 and 9999.
You can also use “3-7-4 [P9] Stretch Mode” (page 3-45) to display this value in the range of 0 to 99999.
Percentage
Displays the received light amount as a percentage (%) of the threshold.
The received light amount during the execution of the teach function is set as 100%.
Example) After executing the teach function with the 2-point setting
The higher received light amount from the two times the teach function was executed is set as 100%.
50%
65%
Received light amount
Threshold
To Next Page
Loading...