MT100 Multipoint Flow Meter OPERATION
Command 50: Read Dynamic Variable Assignments
Device Variable assigned to the primary variable.
Device Variable assigned to the secondary variable.
Device Variable assigned to the tertiary variable.
Device Variable assigned to the quaternary variable.
No Command-Specific Errors
Command 51: Write Dynamic Variable Assignments
Device Variable assigned to the primary variable.
Device Variable assigned to the secondary variable.
Device Variable assigned to the tertiary variable.
Device Variable assigned to the quaternary variable.
Device Variable assigned to the primary variable.
Device Variable assigned to the secondary variable.
Device Variable assigned to the tertiary variable.
Device Variable assigned to the quaternary variable.
No Command-Specific Errors
Note: 1. The value returned in the response data bytes reflects the value actually used by the device.
Fluid Components International LLC 57
To Next Page
Loading...
