EasyManua.ls Logo

Festo CP-FB13-E - Technical Specifications Field Bus Node CP FB13-E

Festo CP-FB13-E
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A. Specifications and index
A-3
Festo Festo P .BE CP FB13-E-EN en 9910c
A.1 Technical specifications Field bus node CP FB13-E
General
Temperature range:
– operation
– storage/transport
-5°C ... + 50 °C
-20 °C ... + 70 °C
Relative humidity 95 %, non-condensing
Protection class as per EN 60529 529 Plug con-
nector inserted or provided with protective cap
IP 65
Protection against electric shock
Protection against direct and indirect contact as
per EN 60204-1/IEC 204
by means of PELV power units
(Protected Extra-Low Voltage)
Operating voltage for the electronics and the input modules
Pin 1
Operating voltage connection
– Rated value
– Tolerance:
24 V DC,
20.4 .. 26.4 V
Current consumption
– Pin 1 node FB13-E
– Complete electronics of the CP system
250 mA
see manual “CP system”, Table of current con-
sumption
Residual ripple 4 Vpp (within tolerance)
Bridging time during drop in logic voltage 20 ms

Table of Contents