1. Installation
1-8
Festo Festo P .BE CP FB13-E-EN en 9910c
Y ou can set the field bus address of the CP system with the
two round address selector switches and DIL switch element
no. 1. The switches are numbered from 0...9. The arrow indi-
cates the units or tens figure of the field bus address set.
Summary of possible field bus addresses
Please note
Field bus addresses may only be assigned once per PROFI-
BUS-DP interface.
Observe any possible limitations as regards the assign-
ment of field bus addresses by your DP master.
Recommendation:
Assign the field bus addresses in ascending order. If necess-
ary, assign the field bus addresses to suit the machine struc -
ture of your system.
Permitted field bus addresses 0; ...; 125
To Next Page
Loading...
