Festo EMCS-ST - Page 96

96
Festo — EMCS-ST — 2021-03b
IO-Link
Index.
Subindex
Name Description Data type
(length)
Access
1)
U = User
M = Maintenance
personnel
S = Specialist
U M S
0x010B.0
(267.0)
Store parame-
ters
Control command for permanent
saving of parameters in the flash
memory
è
Tab. 25 Data storage
parameters
– true: save parameters
–
false: parameters are tempo-
rarily saved in RAM (default)
BooleanT
(1 bytes)
– R/W R/W
File handling commands (from firmware version v19.0.4.107_release)
0x0x3000.
0
(12288.0)
Enable file
handling
Control command for activating
file handling, e.g. firmware
update
– 0: file handling deactivated
(default)
–
8782: file handling activated
–
...: reserved
UInteger16
(2 bytes)
– R/W R/W
0x0x3001.
0
(12289.0)
Execute File
Handling
Control command for executing
file handling
– 0: file handling deactivated
(default)
– 5: overwrite factory settings
–
272: execute file handling,
e.g. firmware update
– ...: reserved
UInteger16
(2 bytes)
– R/W R/W
Diagnostic data (device è master)
0x0020
(32.0)
Error Count Error counter reading since last
Power ON or Reset
UInteger16
(2 bytes)
R R R
0x0024.0
(36.0)
Device Status Information on the device status
–
0: device works without errors
–
1: maintenance required
–
2: outside the specification
–
3: functional check
–
4: failure
–
5 ... 255: reserved
UInteger8
(1 bytes)
R R R