50 FCP-75 Manual — P/N LS10147-003FK-E:A 3/17/2021
Control Panel Installation Remote Station Applications
4.15.5 Transmitter Activated by Dry Contacts
This section describes the connection of a UL 864 listed remote station transmitter to the FCP-75 FACP dry contacts. The FACP contacts
must be supervised by the Remote Station Transmitter Module using end-of-line resistors (ELRs) with a value determined by the transmitter
manufacturer. Power is also provided by the Remote Station Transmitter Manufacturer. Refer to the Remote Station Transmitter Manufac-
turer’s Manual for details.
Figure 4.49 Transmitter Activated by Dry Contacts
To Next Page
Loading...
