Fike FCP-75 - Programming Menu Quick Reference

Programming Menu Quick Reference Programming Overview
FCP-75 Manual — P/N:LS10147-003FK-E:A 3/17/2021 77
8.5 Programming Menu Quick Reference
This section of the manual lists all Program Menu options in the order they appear on the sub-Menus. Default settings are indicated in text or
marked with an asterisk. The comments column provide quick information and a reference to a section (if applicable) which has more
detailed information.
Menu Options/Defaults Comments
Module
Edit Module Select Module
Edit Module ID
Section 9.2.1
Enter Module Name
Edit Module specific options
Add Module
FIK-5824
Serial/Parallel/ IO
Section 9.2.2
FIK-RA2000 LCD
Annunciator
FIK-RA1000R LCD
Annunciator
FIK-RA100 LCD
Annunciator
FIK-RPS1000 Power
Supply
FIK-5496 NAC
Expander
FIK-5880 LED / IO
Module
FIK-5865 LED Annun
Module
FIK-NIC Network
Interface Card
Delete Module Select Module
Section 9.2.3
View Module List Select Module Section 9.2.4
Zone
Edit Zone Select Zone
Edit Zone Name
Section 9.3.1
Zone Properties
Verification Type
*1-Count
2-Count
Alarm Ver.
PAS
SNGL ILOCK
DBL ILOCK
Heat Temp Set
135° to 150°F
135° to 190°F
Smoke Sensitivity Low
Medium
High
Edit Zone Select Zone
Zone Accessory
Opt
Single/Multi-station
Cadence
00-23
CO Single/Multi
station Cadence
00-23
Local Zone
Yes
No
View Zone Points Select Zone to View Section 9.3.2
Group
Edit Group Select Group
Group Name
Section 9.4.1
Group Properties
Template Override Y or N
Dynamic
Act/Template
Override Cadence
00-23
View Group Points Select Group
Edit OPG Template Select template Modify name and which OPG’s are in template
Table 8.3 Programming Quick Reference List