Fiori DB 460 - Replacing the Oil in the Front and Rear Axles

125
5
MAINTENANCE
id.:
DB 460 REV. 00 02/01/2015
5.8.3 REPLACING THE OIL IN THE FRONT AND REAR AXLES (fi g. 8)
CAUTION: Before proceeding, always read the safety regulations for the operations to be carried out
as set out in Chapter 3.
- Turn the engine off and apply the parking brake.
- Loosen drain plugs (1) and (2). Plug (2) is to be set in lower position through the planetary reduction gear
rotation.
- Loosen the oil level cap (3).
- Let oil fl ow out completely.
- Move the planetary reduction gear with cap (2) back into position as shown in the fi gure.
- Loosen the fi lling up plug (4).
- With a funnel put the recommended type of oil in through the fi lling up cap (4) until it starts dripping from the
level hole (3) and (2).
- Park the vehicle on level ground, turn off the engine, apply the parking brake, lower the arm and remove the
ignition key.
8
3
4
2
4
1
3
1
4
3
1