Fiori DB 460 - Vehicle Safety Labels and Devices

47
3
SAFETY PRECAUTIONS
id.:
DB 460 REV. 00 02/01/2015
The warning and safety labels are found on your vehicle as shown in the fi gures below and serve as a guide
for your own safety and those that work with you. A label is positioned at each part of the vehicle that may be
a source of residual risk. Therefore, walk around the vehicle with this manual in hand and familiarise yourself
with where the various labels are positioned and read them.
Point them out to all the vehicle operators and always keep them legible; if they become illegible, order a set
from the FIORI Spare Parts Service Department.
Always keep the labels clean. Use detergent and water to clean the labels. Do not use organic solvents or
petrol as they may damage the labels.
1 - Clean the labels with soap and water and dry them with a soft cloth.
2 - Replace the damaged or missing labels with original FIORI labels.
3 - If you need to replace a component bearing a safety or warning label, make sure that the new component
has the same labels.
4 - When replacing labels make sure that the surface on which they are applied is clean, dry and without oil
or grease.
WARNING: The manufacturer declines all responsibility for personal injury or property damage if the
rules of conduct indicated on the labels are not observed or the labels are not kept in
perfect conditions.
3.4.1 LOCATION OF THE WARNING AND SAFETY LABELS
3.4 WARNING AND SAFETY LABELS (RESIDUAL RISKS)
CABIN INTERIOR