Fiori DB 460 - Engine and Water System Maintenance

138
5
MAINTENANCE
id.:
DB 460 REV. 00 02/01/2015
5.11 ENGINE
5.11.1 CLEANING THE ENGINE AIR FILTER SEPARATOR (fi g. 23)
5.11.2 CLEANING OR REPLACING THE ENGINE AIR FILTER CARTRDIGE (fi g. 24)
- Open the engine compartment lid to access the fi lter, squeeze the lower part of the separator A with your
fi ngers to open it, letting the dust accumulated inside drop out.
- Move the vehicle onto fl at ground, engage the parking brake, turn off the engine and remove the ignition
key.
Always wear protective goggles with side screens when working with compressed
air.
Limit the pressure to 2 bar according to the regulations in force.
- Move the vehicle onto fl at ground, engage the parking brake, turn off the engine and remove the ignition
key.
CAUTION: Before proceeding, always read the safety regulations for the operations to be carried out
as set out in Chapter 3.
CAUTION: Do not pollute the environment. Keep the fi lters in special containers and send them to
companies specialised in storage and disposal of polluting and hazardous waste.
DANGER:
23
A
24
A
B
C