Fiori DB 460 - Safety Precautions; Foreword and General Use Precautions

27
3
SAFETY PRECAUTIONS
id.:
DB 460 REV. 00 02/01/2015
3.1.3 NOISE LEVEL
3.1 PRECAUTIONS OF USE
Wear clothing suited to the work to be carried out on the site and do not wear loose or hanging clothes such
as ties, scarves, unbuttoned jackets, unzipped garments or sleeves with wide cuffs, which may get caught up
in the moving parts. Do not wear rings, wrist watches or any other jewellery.
The following protective clothing is to be worn as prescribed by the site regulations:
- Hardhat
- Non-slip shoes
- Protective goggles
- Protective gloves
- Anti-noise headsets (where applicable)
- Refl ecting garments or vests
- Raincoats in bad weather
- Protective mask for cement loading
This manual is intended as a practical and rational guide to proper use and prevention of the most common
causes of accidents during work and maintenance.
Below are the main rules that must strictly be followed:
- Carefully read this manual before any starting, use, maintenance, refuelling or other operations.
- Read and comply with all the SAFETY REGULATIONS given in this manual before carrying out any
operation.
- Prudence and judgement during appropriate use of the vehicle are essential and basic factors for the safety
of the operator and of other people working near the vehicle.
Therefore, before starting any work, you must know exactly what the functions of all the controls and the
stability characteristics of the vehicle are.
- The maximum overall performance level of the vehicle is optimised during functional testing before delivery.
- Do not use the vehicle outside the limits defi ned during design; exceeding these limits may be dangerous
and cause damage to the vehicle.
- Do not attempt to improve vehicle performance with unapproved modifi cations.
- Any alteration will lead to forfeiture of the warranty on the vehicle as well as on functional and accessory
equipment.
3.0 FOREWORD
3.1.1 PERSONAL PROTECTION DEVICES (PPD)
3.1.2 VEHICLE LIMITS
In compliance with directive 2000/14/EC the following sound power values were measured according to ISO
6394:
- Sound power level measured .........................................................................................................106 dB(A)
- Sound power level guaranteed .......................................................................................................108 dB(A)
- Equivalent sound pressure level measured at the operator’s ears according to ISO 6394 .............. 88 dB(A)