Fischer Panda 5000i PVK-U - Exhaust Installation; Isolation Test

Installation Instructions
30.10.12 Kapitel/Chapter 6: Installation Instructions Seite/Page 97
6.17 Exhaust installation
Fig. 6.17-1: Exhaust connection for roof outlet
Fig. 6.17-2: Exhaust connection for mounting below the vehicle
6.18 Isolation test
ACHTUNG!After installation, but before the generator is set into
normal operation and handed to the customer, an
isolation test must be performed as followed:
1. Disconnect all load.
2. Start the generator.
3
2
1
4
5
6
7
8
1. Exhaust oulet
2. Generator
3. Dachdurchführung mit Winkel
4. Vibration damper
5. External pre-silencer
6. Exhaust pipe
7. External series silencer
1
2
3
4
5
6
7
8
1. Generator
2. Exhaust outlet
3. Compensator
4. External pre-silencer
5. Vibration damper
6. Exhaust pipe
7. External series silencer
8. End pipe