Installation Instructions
Seite/Page 72 Kapitel/Chapter 6: Installation Instructions 30.10.12
6.7.2 Installation PMGi inverter - See separate PMGi 8000 inverter manual
6.8 Installation of the cooling system
6.8.1 General instructions
The PANDA vehicle generator is supplied as standard without a radiator. Various radiators are available according to
the customer’s requirements; these can be chosen according to the appropriate operating and installation situation.
The cooling system can also be assembled together with a normal commercial vehicle radiator.
Some series has an integrated Radiator (f.e. PVK-UK, PSC ect.), for these generators an external radiator is not
necessary.
Note:
At generators with attached radiator (f.e. PVK-UK series) skip
this chapter.
6.8.2 Fischer Panda installation kit - cooling system
Note:The following additional components will be required for the
specified installation. You can purchase them as an installation
kit or separately at Fischer Panda.
Fig. 6.8.2-1: Coolant hoseCoolant hose
representative picture
Fig. 6.8.2-2: Elbow pipe
Elbow pipe
representative picture
To Next Page
Loading...
