5.5.10 Connecting the torque monitoring system
Procedure
To connect the torque monitoring system to the gear unit, proceed as follows:
1. Ensure that the connections of the torque monitoring sensors are not damaged.
2. Electrically connect the torque monitoring sensor connections.
Further information
Additional information about the torque monitoring system can be found in the torque
monitoring system operating instructions in the complete documentation for the gear unit.
5.5.11 Connecting the gear unit condition monitoring system
Procedure
To connect the gear unit "Condition Monitoring" system to the gear unit, proceed as follows:
1. Ensure that the connections of the measuring equipment for the gear unit condition
monitoring system are not damaged.
2. Electrically connect the connections of the measuring equipment for the gear unit condition
monitoring system.
Further information
Additional information about the gear unit condition monitoring system can be found in the
gear unit condition monitoring system operating instructions in the complete documentation
for the gear unit.
5.5.12 Electrical connections
Procedure
DANGER
Electric shock
Live parts can cause electric shock.
Ensure that the entire plant is de-energised before starting electrical installation work.
Carefully observe the five safety rules (Page 13).
Assembly
5.5 Connecting components
Gear unit 5118en
72 Operating Instructions 10/2017
To Next Page
Loading...
