6.2.1 Heating
Please observe the following measures to commission the gear unit with heating:
● Ensure that the heating elements are not exposed.
● Check the switching points of the temperature monitor.
WARNING
The oil sump can catch fire
The oil sump can catch fire if exposed heating elements are switched on.
Never switch on the heating elements until you have checked that they are completely
immersed in the oil bath.
Further information
Further information about heating elements can be found in the heating element operating
instructions in the complete documentation for the gear unit.
Commissioning
6.2 Measures during commissioning
Gear unit 5118en
Operating Instructions 10/2017 81
To Next Page
Loading...
