Flexim FLUXUS WD - Page 158

Annex
A Menu structure FLUXUS WD
2018-07-16, UMFLUXUS_WDV1-3EN
158
Calculation channels
(see chapter 17)
Parameters Options
Channel x
Channel x
Calculation
Measurement
Units of measurement
Calculation type
Physical quantity Flow velocity
Average (all chan.
OK) (AND)
Average (1 chan.
OK) (OR)
Special
 Volumetric flow rate
 Mass flow rate
 Heat flow
 Sound speed
 Flow velocity
Volumetric flow rate
Volume
Source ch. … [1]
Source ch. …
[1]
Mass flow rate
Unit of measurement
 Meas. channel A
 Meas. channel B
…
 No source channel
 Meas. channel A
 Meas. channel B
…
No source channel
Mass
Damping
Heat flow
Error value delay
[2]
Sign source Heat quantity
 -lx|=value (-)
 x=keep sign
 -x=reciprocal value
 lx|=value (+)
Special Measurement
 1/2 (AND)
 1/n (OR)
 No average calculat.
Select the calculation
channel
Linear correction
No Yes
Factor
Offset
Upper limit
No limit Set to limit Set to error
Upper limit
Cut-off flow
Calculation
Legend
[1] n corresponds to the number of physical channels in the transmitter
[2] only if enabled in Special functions > Dialogs/Menus
1
2
3