Flexim FLUXUS WD - Page 30

6 Installation
6.1 Transmitter FLUXUS WD
2018-07-16, UMFLUXUS_WDV1-3EN
30
Installation on a pipe > 2''
The pipe mounting kit is fixed to the pipe by using tension straps.
• Fix the instrument mounting plate (1) to the pipe using tension straps (2) instead of the shackles (see Fig. 6.9).
Caution!
The edge of the tension strap is very sharp.
Risk of injury!
 Debur sharp edges.
 Wear the required personal protective equipment. Observe the applicable rules.
Fig. 6.9: Pipe installation with tension straps
1 – instrument mounting plate
2 – tension strap
2
1