Flexitron Webdyn SunPM - 5.3.7 “ftp”: Configuration of the FTP;SFTP server

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
183
• password: Password required for authentication on some APNs.
Return:
• If successful for an SMS command: no return.
• If an error is encountered: an explanatory message.
Examples SMS :
apn=m
or
apn=m2minternet
5.3.7 “ftp”: Conguration of the FTP/SFTP server
Conguration of the FTP/SFTP server “Server 1”.
Available via SMS only.
ftp=<server>:<login>:<password>:<port>:<interface>
Settings:
• server: Name of the FTP server to connect to. This parameter can be a name or an IP address.
• login: User name on the specied FTP server.
• password: Password associated with the above user.
• port: FTP server port number. By default FTP servers use port 21.
• interface: Type of connection to use. The allowed values are:
• ethernet: Uses the RJ45 Ethernet link to establish the connection with the FTP server.
The Ethernet interface must have been congured beforehand for the connection to work
(See chapter 3.2.2.3: “Networks”).
• modem: Use the modem to establish the connection with the FTP server. The modem
must have been congured beforehand. Otherwise, it is possible to use the apn command
to congure it by SMS (See chapter 5.3.6: “apn: Modem conguration”).