Flexitron Webdyn SunPM User Manual

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
146
The conguration le names indicated above must be respected.
Once the new conguration has been applied, the result is indicated in the concentrator’s log le.
If there is an error in the conguration le such as an incorrect value, the concentrator will not take it into
account and will use its default value if one exists, otherwise the le will be rejected. The LOG le will
report the error and the applied default value.
Refer to section “1. Concentrator Operation” or to “Appendix A: “_cong.ini” le” to see the list of
variables and their possible values.
4.1.2 “DEF”, the Denitions
The devices declared in the “<uid>_daq.csv” le use a denition le describing all the available variables
on the device. The devices available on the concentrator are:
• Inputs/outputs: IO
• Remote customer information: TIC
• RTU/TCP Modbus
• Proprietary inverter protocols
The denition les the WebdynSunPM can generate automatically are:
• The IO le
• The SunSpec les
• The proprietary inverter protocol les
To create modbus denition les, see section 3.1.2.2.2.2: “Modbus”.
Launching a device scan makes it possible to automatically generate its denition le and to upload it
to the “DEF” directory on the server. It is also possible to build your own denition le or to modify the
automatically generated one.
A new denition le or a modication to one of the denition les is automatically retrieved by the

Flexitron Webdyn SunPM Specifications

General

Brand	Flexitron
Model	Webdyn SunPM
Category	Controller
Language	English