Flexitron Webdyn SunPM User Manual

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
211
SERVER2_Interface Network interface to use to access the remote
server for server 2 connection. The possible
values are:
•ethernet: uses the ethernet connection
•modem: uses the 2G/3G/4G interface with the
embedded SIM card
•sdcard : utilise la carte microSD insérée dans
le concentrateur
This parameter cannot be empty
modem
SERVER2_Type The type of server to which the concentrator is
to connect for the Server 2 connection. There
are several different server types. It is therefore
important to select the right server type.
The possible values are:
•ftp: FTP server
•sftp: SFTP server
•webdav : serveur WebDAV-HTTPS
•mqtt: MQTT server
•mqtts: secure MQTT server
•mqtts_aws: MQTTS server on “AWS IoT”
•mqtts_azure : serveur MQTTS sur « Azure IoT »
•mqtts_gcloud: MQTTS server on “Google Cloud
IoT”
This parameter cannot be empty
ftp
WEB_Password Password to access the conguration using the
concentrator web site.
high
Note that unless otherwise indicated, parameters can be omitted from the conguration le. In that case
the default value will be used by the concentrator as indicated by the le import.
When the concentrator writes the le and sends it to the server, all the parameters are re-established.
9.2 Appendix B: Time zone list
The list of authorised values for the “NTP_TimeZone” parameter is the following:
(GMT-11:00) Midway Island, Samoa
(GMT-10:00) Honolulu
(GMT-10:00) Tahiti
(GMT-09:30) Marquesas
(GMT-09:00) Anchorage

Flexitron Webdyn SunPM Specifications

General

Brand	Flexitron
Model	Webdyn SunPM
Category	Controller
Language	English