contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
Modbus •RTU
•TCP
Clock synchronisation NTP
File format for the server (IS) •CSV for FTP/SFTP/WebDAV-HTTPS
•JSON for MQTT/MQTTS
1.7 Safety Instructions
Follow all the safety instructions in this guide.
Failure to follow these instructions can damage equipment and endanger people.
Electric connection:
• All wiring work must be carried out by a specialised qualied electrician.
• Please follow all the safety instructions featured in the manufacturer’s device documentation.
The WebdynSunPM product can be damaged by electrostatic discharges (ESD)
Class 3 equipment: the device operates on safety extra-low voltage (SELV) (50V maximum). The
voltage reduction must be obtained using a safety transformer providing safe galvanic isolation between
primary and secondary.
This equipment is not suitable for use on premises that may host children.
Do not install the equipment near a heat source or at a height greater than 2m.
To clean the product, only use a slightly damp cloth to gently clean and wipe the surfaces. Never
use aggressive chemical agents or solvents that could alter the plastic material or corrode the metal
parts.
It is essential to leave a 20 cm empty space around the antenna to optimise the Modem cell
sensitivity.
1.8 Regulation
The product is compliant with the European directives according to the EU declaration of Conformity
available from Webdyn or from the web site: www.webdyn.com.
To Next Page
Loading...
Need help?
General