contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
About this Document
This guide describes all the WebdynSunPM product characteristics.
Its purpose is to help operators install and congure their WebdynSunPM and to allow operators to
include collected data in their IS.
This manual is split into six separate sections:
• Section 1: General presentation
• Section 2: Installation
• Section 3: Conguration
• Section 4: Operation
• Section 5: Tools & diagnostics
• Section 6: FAQ
Scope
This technical description is valid for WebdynSunPM concentrators as from hardware version V1 and
software version V3.0.0.
Target Audience
This guide is intended for all people involved in photovoltaic system supervision, in particular people in
charge of local or remote installation maintenance, as well as for the developers of portals designed to
use the sent data.
It is recommended to entrust the installation and commissioning of the WebdynSunPM to qualied and
trained persons. Qualied persons must have the following skills:
• Detailed knowledge of network management services.
• Knowledge of IP-based network protocols.
• Knowledge of the specications of the protocols used (Modbus, SunSPec, etc.) and of the
equipment connected to the concentrator.
• Training in the installation and conguration of computer systems.
• Knowledge of and compliance with this document and all safety information.
To Next Page
Loading...
Need help?
General