contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
2.4.4.2 USB Interface
A USB port is available on top of the product next to the LAN connectors and analog inputs. The USB port
is used to connect the TIC accessory to remotely read the information from electricity meters.
2.4.5 Ethernet Interface
The WebdynSunPM concentrator has 2 Ethernet interfaces (LAN1 and LAN2) which are separate from
each other.
These Ethernet interfaces allow the concentrator to be part of 2 different Ethernet networks to
communicate with local IP devices belonging to 2 separate networks or to communicate with the IS using
Ethernet.
To Next Page
Loading...
Need help?
General