Flexitron Webdyn SunPM - 5.3.3 “factory”: Return to factory settings

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
180
• mqtts: The server is MQTTS type.
• mode: Server 1 operating mode. The possible values are:
• strategy_wsun1_compliant: The server is of type FTP, SFTP or WebDAV-HTTPS and is
congured as a main server.
• strategy_wsun1_compliant_backup: The server is FTP, SFTP or WebDAV-HTTPS type and
is congured as a backup server.
• strategy_mqtt: The server is of MQTT or MQTTS type.
• ipaddr: Server address 1.
• port: Port of server 1.
• last: Last date and time at which the WebdynSun PM connected to server 1 as well as the result
of this connection in the following format: “DD/MM HH:MM <connection result>”.
6/6
srv=<server>
status=<status>
type=<type>
mode=<mode>
addr=<ipaddr>
port=<port>
last=<last>
• The information in this SMS is the same as in the previous one, but relates to server 2.
Example SMS :
status
5.3.3 “factory”: Return to factory settings
Resetting the WebdynSun PM. The conguration les as well as the equipment acquisition data are
deleted and the product is restarted immediately.
Available via SMS only.
factory
No parameters.
Return:
• If successful for an SMS command: no return.