contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
3/6
eth1:
ip=<ipaddr>
mask=<mask>
gw=<gateway>
dns=<dns>
• The information in this SMS is the same as in the previous one, but relates to the Ethernet 2
interface.
4/6
apn=<apn>
rssi=<rssi>
status=<status>
• apn: Name of the apn congured for the modem.
• rssi: Modem signal strength.
• status: Modem connection status. The possible values are:
• connected: The modem is currently connected to the mobile data network.
• disconnected: The modem is not currently connected to the mobile data network.
5/6
srv=<server>
status=<status>
type=<type>
mode=<mode>
addr=<ipaddr>
port=<port>
last=
• srv: Server name 1.
• status: Indicates whether server 1 is activated or not. The possible values are:
• enabled: The server is enabled.
• disabled: The server is disabled.
• type: Type of server 1. The possible values are:
• ftp: The server is FTP type.
• sftp: The server is SFTP type.
• webdav: The server is WebDAV-HTTPS type.
• mqtt: The server is of MQTT type.