Flexitron Webdyn SunPM - 4.1.5 “CMD” Commands; 4.1.6 “SCRIPTS”; 4.1.7 “BIN” Update

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
155
4.1.5 “CMD” Commands
Command les are used to perform tasks remotely on the hub. It is thus possible to ask the concentrator
to launch a search for equipment, to obtain the conguration, and so on. The list of possibilities is
limitless.
Command les are not supported when the SD card is used.
The operation of the command le (format and processing) is described in chapter 5: “Commands”. The
commands available are detailed in chapter 5.3: “List of Commands”.
4.1.6 “SCRIPTS”
The “SCRIPT” directory on the server is used to supply or retrieve Lua scripts to and from the concentrator.
The script le format is below:
<comment>_.lua
Where:
• <comment>: free user eld
Examples: ControlPower.lua
For more details on script use, see the “WebdynSunPM LUA User Guide.pdf” document available at:
https://www.webdyn.com/support/webdynsunpm/
4.1.7 “BIN” Update
The “BIN” directory on the server is used to store the rmware used to update the concentrator.
The update le format is below:
<uid>_wgapp_x.x.x.xxxxx.spm
Where:
• <uid>: Concentrator identier.
• x.x.x.xxxxx: is the rmware version number.
Examples: wgapp_3.2.9.34734.spm
To perform the update, follow the procedure described in chapter 6.2: “By FTP/SFTP/WebDAV”). After
applying the update, it is possible to delete the rmware le.