Flexitron Webdyn SunPM - 5.3.2 “status”: Retrieval of the status of the concentrator

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
178
Examples SMS :
connect
oR
connect=2
5.3.2 “status”: Retrieval of the status of the concentrator
Returns information about the current conguration.
Available via SMS only.
status
No parameters.
The information is returned in the form of 6 SMS, the details of which are as follows:
1/6
idSite=<idSite>
fmwVersion=<version du rmware>
• idSite: Corresponds to the name of the site, i.e. the identier of the WebdynSun PM.
• rmware version: Version number of the rmware currently loaded on the hub.
2/6
eth0:
ip=<ipaddr>
mask=<mask>
gw=<gateway>
dns=<dns>
• ipaddr: IP address congured on the Ethernet 1 interface.
• mask: Subnet mask congured on the Ethernet 1 interface.
• gateway: Address of the gateway allowing the concentrator to connect to an external network
on the Ethernet 1 interface.
• dns: List of DNS servers used for name resolution for the Ethernet 1 interface. If several DNS
servers are congured, they are separated by the ‘/’ character.