contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
• “*** INVALID FCT ***”: The response contains an incorrect function code. The frame is
ignored.
3.2.1.3.2.2 Input/output logs
The name of the input/output log les is built according to the same principle as the other gateway log
les, namely: “uid”_IO_“date”.log.gz.
The logs contain the following information:
datetime_1;data
datetime_2;data
...
datetime_Y;data
“datetime” is in the format DD/MM/YYYY hh:mm:ss.mmm, with DD the day of the month, MM the number
of the month, YYYY the year, hh the hour of the communication, mm the minute, ss for seconds, and
mmm for milliseconds.
The “data” eld contains the input-output data.
First appears the type of information:
• “In”: indicates that it is an input
• “Out”: indicates that it is an output
Then, the name of the impacted input/output, as dened in the conguration
Then, the new state of the input/output:
• 0: the input/output is closed
• 1: input/output is open
• Any other value contains the value of an analog input
3.2.2 Settings
All the concentrator settings are grouped together on the “Settings” tab. The settings are split into several
parts on the menu.
To Next Page
Loading...
Need help?
General