Flexitron Webdyn SunPM User Manual

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
92
3.2.2.1 Concentrator
The “Concentrator” part is used to change the concentrator’s identier and description.
WEB INTERFACE PARAMETER <uid>_cong.ini
conguration le
DESCRIPTION
Identier Concentrator_Identier Concentrator identier
By default, a unique “WPMxxxxxx” identier is lled in. The “xxxxxx” corresponds to the last 6 characters
of the concentrator’s MAC address indicated on the product label. (see section 2.2.2: “Identication”)
Identier: the identier is used when creating the names of the les uploaded to the server. It is
important that it be unique to be able to know where the les on the remote server come from. The
concentrator identier is identied as follows in the document: <uid>.
3.2.2.2. Serial
The “serial” part is used to congure 3 RS485/422 serial ports each with their own settings and output.
(see section 2.4.6: “RS485/RS422 Serial interface”).

Flexitron Webdyn SunPM Specifications

General

Brand	Flexitron
Model	Webdyn SunPM
Category	Controller
Language	English