Flexitron Webdyn SunPM User Manual

contact@webdyn.com | webdyn.com
V2.05 subject to changes | Webdyn © by Flexitron Group
203
MQTT2_EnableAlarmPost Activate the publication of alarms on the
dedicated topic.
The possible values are:
•0: Publication of alarms is disabled
•1: The publication of alarms is activated
and the concentrator remains in permanent
connection mode with the MQTT server.
Functional only for “mqtts_azure” type
MQTT2_
EnableInvokeMethod
Enable method calling. Allows the use of
dedicated topics.
The possible values are:
•0: Method call disabled
•1: Method call activated and the concentrator
remains in permanent connection mode with the
MQTT server.
Functional only for “mqtts_azure” type
MQTT2_Insecure Disable verication of the host name specied in
certicates.
The possible values are:
•0: Verication enabled
•1: Verication disabled.
Functional only for “mqtts” type
MQTT2_KeepAlive If no exchange made with the MQTT server for
the time dened in seconds, the concentrator
sends a ping to the MQTT server in order to
check the connection to it.
If the value is “0”, KeepAlive is disabled.
If the hub is in persistent connection mode with
the MQTT server and a disconnection is detected
after a KeepAlive, the hub will automatically
reconnect to the MQTT server.
10
MQTT2_KeyFile Name of the le including the private key specic
to the concentrator used for the connection. The
le is to be retrieved from your MQTT server and
must be imported to the concentrator by FTP or
by the web interface.
Works for all MQTT types except “mqtt”
MQTT2_Login Username to access the MQTT server.
Functional only for “mqtt” and “mqtts” types

Flexitron Webdyn SunPM Specifications

General

Brand	Flexitron
Model	Webdyn SunPM
Category	Controller
Language	English