Victor Xu Page 60 12 Jan. 2011
Copyright 2011 © Shenzhen Runtianzhi Image Technology, Co., Ltd.
http://www.floradigital.com
-Measure Height of media check box: Tick this box, the software will
measure height at every time before print a job.
-Not Inquery if Measure Height check box: Un-tick this box, it will pop out the
dialog box as below:
-Center mirror image & Output to files check box: there is no use here.
-Not Inquery If Reposit Beam check box: Tick this box, it will pop out a dialog
box as below to ask if back to home position.
Spot color mode:
-Spot color mode drop-down list: This is used to white mode under spot color mode.
For X Align and Right
Offset alignment
For internal Right and
left alignment
To Next Page
Loading...
