EasyManua.ls Logo

Fluidigm CyTOF XT - Electrical Safety

Fluidigm CyTOF XT
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix F: Safety
Electrical Safety
CyTOF XT User Guide 145
Symbol
Description
Electricity hazard. Indicates high electricity levels and a threat of electric shock from
machines and/or equipment in the vicinity. You may suffer severe injuries or death.
Ultraviolet light hazard.
Pinch hazard. Indicates where pinch hazards exist. Exercise caution when operating
around these areas.
Finger cut hazard.
Non-ionizing radiation hazard. Exposure to high-frequency radio waves and radio
frequency radiation can result in injuries.
Indicates specific chemical harm.
A compressed gas cylinder can become a projectile when ruptured, with the potential to
cause significant damage.
Indicates a health hazard.
Power switch is in the Off position.
Power switch is in the On position.
Protective conductor terminal (main ground). It must be connected to earth ground
before any other electrical connections are made to the instrument or system.
To minimize negative environmental impact from disposal of electronic waste, do not
dispose of electronic waste in unsorted municipal waste.
Follow local municipal waste ordinances for proper disposal provision. Contact customer
service for information about responsible disposal options.
Electrical Safety
WARNING ELECTRICAL HAZARD. DO NOT REMOVE THE COVERS. Electrical
shock can result if the system is operated without its protective covers. No internal
components under the covers are serviceable by the user.
WARNING ELECTRICAL HAZARD. Plug the system into a properly grounded
receptacle with adequate current capacity.
WARNING Lethal voltages are present at certain areas within the system. Only a
Fluidigm field service engineer or those similarly authorized and trained by
Fluidigm personnel should install or repair the system.
WARNING The system power supplies are capable of generating potentially lethal
voltages and currents. Maintenance should be performed only by a Fluidigm field
service engineer or by maintenance personnel, employed by the customer, who
have been trained by Fluidigm and are appropriately certified.

Table of Contents

Related product manuals