CyTOF XT User Guide 5
About This User Guide
This user guide describes the basic operation and maintenance of the CyTOF® XT system.
For detailed information about operating the system using CyTOF Software, click the Help
icon to access the integrated help guide, also available as the CyTOF Software v8.0
Help for CyTOF XT (FLDM-00045). The software Help also includes an end-to-end daily
workflow. For complete instrument specifications and pre-unpacking/installation
instructions, see the CyTOF XT System Site Requirements Guide (FLDM-00360).
IMPORTANT Before using the CyTOF XTsystem, read and understand the detailed
instructions and safety guidelines in this document. Failure to follow these guidelines may
result in undesirable effects, injury to personnel, and/or damage to the system or to
property. For complete safety information, see Appendix F.
Safety Alert Conventions
Fluidigm documentation uses specific conventions for presenting information that may
require your attention. Refer to the following safety alert conventions.
Safety Alerts for Chemicals
For hazards associated with chemicals, this document follows the United Nations Globally
Harmonized System of Classification and Labelling of Chemicals (GHS) and uses indicators
that include a pictogram and a signal word that indicates the severity level:
Pictogram (see example) consisting of a symbol on a white background within a red
diamond-shaped frame. Refer to the individual safety data sheet (SDS) for the
applicable pictograms and hazards pertaining to the chemicals being used.
To Next Page
Loading...
