Fluke 5730A User Manual

5730A
Operators Manual
4-48
Some selections do not have submenus beneath them or do not include changeable items.
For example, in the display below, the About this Instrument selection has no
changeable items.
Calibration
DC Zero
Artifact Calibration
Calibration Check
Wideband Gain Calibration
Wideband Flatness Calibration
Change Calibration Password
Range Adjustment
Generate Report
Instrument Setting
Date/Time Format
Language
Display
Self Test & Diagnotics
Diagnostics
Key, Knob, and Bell Tests
Instrument Setup
Remote Port
Uncertainty Information
Output Limits
Sourcing Hardware
Error Reference
Exit
About this Instrument
Setup Menu
hhp104.eps
About this Instrument opens a page to show non-editable information about the
Calibrator hardware and software.
Software Information
Main SW Version: v1.00
Inguard SW Version: B
Serial Number: 0000000
Hardware Information
Installed Hardware Assemblies
Setup Menu
About this
Instrument
Exit
hhp156.eps

Fluke 5730A Specifications

General

Type	Multifunction Calibrator
Resistance Range	0 to 1 GΩ
AC Voltage Frequency	10 Hz to 1 MHz
Display	Color LCD
Interfaces	RS-232, Ethernet
Weight	18 kg
DC Voltage Range	0 to ±1100 V
Dimensions	172 mm H x 432 mm W x 457 mm D (6.8 in H x 17 in W x 18 in D)