Fluke 5730A User Manual

5730A
Operators Manual
A-2
24 Cannot get required AuxInfo parameters (config/cal)
25 Cannot open new file (config/cal)
26 Failed to read the existing (destination) file (config/cal)
27 Failed to read the new (source) file (config/cal)
28 Cannot remove existing backup file (config/cal)
29 Cannot rename existing file to backup file (config/cal)
30 Source file does not exist (config/cal)
31 Invalid timestamp. Cannot convert to epoch time
32 Kernel Datapath1 not specified in AuxInfo
33 Kernel Datapath2 not specified in AuxInfo
34 Kernel Device not specified in AuxInfo
35 Kernel Erase Command not specified in AuxInfo
36 Cannot extract Kernel update data from AuxInfo
37 Kernel Offset not specified in AuxInfo
38 Kernel Read Command not specified in AuxInfo
39 Kernel Write Command not specified in AuxInfo
40 Kernel Device failed to close
41 Kernel Device failed to return info about device status
42 Kernel Device failed to open
43 Kernel Device failed to return status (error not used).
44 Unable to determine the size of the Kernel image file
45 Invalid offset in Kernel image section
46 Unable to extract command1 from AuxInfo for FrontPanel_Part3
47 Unable to extract command2 from AuxInfo for FrontPanel_Part3
48 Error creating interim directory
49 MD5 hash of downloaded file does not agree with AuxInfo
50 Error mounting USB device
51 File to be downloaded does not exist on USB device
52 USB device not plugged in
53 Error deleting previous backup file
54 Error renaming installed file to backup
55 Error moving download file to destination directory
56 Remove file operation not specified in AuxInfo
57 Remove file operation failed
58 Error copying file from USB device to interim directory

Fluke 5730A Specifications

General

Type	Multifunction Calibrator
Resistance Range	0 to 1 GΩ
AC Voltage Frequency	10 Hz to 1 MHz
Display	Color LCD
Interfaces	RS-232, Ethernet
Weight	18 kg
DC Voltage Range	0 to ±1100 V
Dimensions	172 mm H x 432 mm W x 457 mm D (6.8 in H x 17 in W x 18 in D)