Appendices
Fault Codes A
A-11
2509 Could not Cal 2.2 V Zero
2510 Could not Cal 220 mV Gain S1
2511 Could not Cal 220 mV Gain S2
2512 Could not Cal 220 mV Gain S3
2513 Could not Cal 220 mV Gain S4
2514 Could not Cal 220 V DC Offset
2515 Could not Cal 220 V DC Rnet
2516 Could not Cal 220 V DC Gain
2517 Could not Cal ACV Gain
2518 Flatness Cal: Main Sensor Fail?
2519 Flatness Cal: AC Cal Sensor Fail?
2520 Could not Cal Fine Tune (14 bit) DAC
2521 Could not Cal Fine Tune 15th bit Down
2522 Could not Cal Fine Tune 15th bit Up
2523 Could not Cal 2.2 mV/22 mV step 1
2524 Could not Cal 2.2 mV/22 mV step 2
2525 Could not Cal 220 V AC Offset
2526 Could not Cal 220 V AC Gain
2527 Could not Cal 220 mV Offset
2528 Could not Cal 1100 V AC/DC Offset
2529 Could not Cal 1100 V AC/DC Gain
2530 Could not Cal 220 μA DC Zero
2531 Could not Cal 2.2 mA DC Zero
2532 Could not Cal 22 mA DC Zero
2533 Could not Cal 220 mA DC Zero
2534 Could not Cal 2.2 A DC Zero
2535 Could not Cal 220 μA DCI (Meas 1)
2536 Could not Cal 220 μA DCI (Meas 2)
2537 Could not Cal 2.2 mA DCI (Meas 1)
2538 Could not Cal 2.2 mA DCI (Meas 2)
2539 Could not Cal 22 mA DCI (Meas 1)
2540 Could not Cal 22 mA DCI (Meas 2)
2541 Could not Cal 220 mA DCI (Meas 1)
2542 Could not Cal 220 mA DCI (Meas 2)
2543 Could not Cal 2.2 A DCI (Meas 1)
To Next Page
Loading...
