Appendices
Fault Codes A
A-25
4800-Level Faults: GPIB
4800 Error opening GPIB Controller
4801 Error setting GPIB Primary Address
4802 Error occurred reading characters from GPIB controller
4803 Error occurred sending characters to the GPIB controller
4804 GPIB DOS Error
4805 GPIB Specified Interface Board is not Active Controller
4806 GPIB No present listening devices
4807 GPIB Interface Board has not been addressed properly
4808 GPIB Invalid argument
4809 GPIB Specified Interface Board is not System Controller
4810 GPIB I/O operation aborted (time-out)
4811 GPIB Non-existent GPIB board
4812 GPIB Routine not allowed during asynchronous I/O operation
4813 GPIB No capability for operation
4814 GPIB File System Error
4815 GPIB Command byte transfer error
4816 GPIB Serial poll status byte lost
4817 GPIB SRQ stuck in ON position
4818 GPIB Table problem
4900-Level Faults: USB Host
4900 Failed to mount USB drive
4901 Failed to copy files
To Next Page
Loading...
