Remote Operation
Remote Operation Commands 3
3-27
SYST:LANG <lang>
Set the display language. The available languages are dependent upon which version of the
product is supplied. The version is dependent upon the final destination and configuration.
European: ENGLish (default), FRENch, GERMan, PORTuguese, SPANish, RUSSian
Asian: ENGLish (default), CHINese, JAPanese, KORean
Example: SYST:LANG SPAN
SYST:LANG:CAT?
Read the available display languages. The available languages are dependent upon which version
of the product is supplied. The version is dependent upon the final destination and configuration.
European: ENGLish (default), FRENch, GERMan, PORTuguese, RUSSian, SPANish
Asian: ENGLish (default), CHINese, JAPanese, KORean
Example European: SYST:LANG:CAT?
Response: “ENGL”,”FREN”,”SPAN”,”PORT”,”GERM”,“RUSS”
SYST:PASS:CDIS
Disable access to password protected setting commands. This command disables the system
password protection.
Example: SYST:PASS:CDIS
Response: This command has no response.
SYST:PASS:CEN [n]
This command enables the system password. This password needs to be enabled in order to use
the conditionally protected commands. When the power of the instrument is cycled, system
password protection is disabled. “n” is a four digit password.
Range = {0000 – 9999}; Default: 1234.
Example: SYST:PASS:CEN 1234
Response: This command has no response.
SYST:PASS:CEN:STAT?
Read the access state of password protected setting commands. This command reports the current
status of the system password.
Example: SYST:PASS:CEN:STAT?
Response: 0
SYST:PASS:NEW <n>|DEF
Note
This command is unconditionally protected, that requires a password to set it.
Set the password, where “n” is the new four digit password.
Range = {0000 – 9999}; Default: 1234.
Example: SYST:PASS:NEW 1234
Response: This command has no response.
To Next Page
Loading...
