81
9-1-3. MFR-TALM
Basic specifications
30% to 85% (no condensation)
+12 V DC pin connector x 2 (redundant power supplies in standard
configuration)
100 V AC to 120 V AC: 17 VA (9 W)
220 V AC to 240 V AC: 20 VA (9 W)
212 (W) x 44 (H) x 161 (D) mm EIA 1 RU half size
480 (W) (Including single or dual rack mount brackets)
AC adapter: Replace every 5 years
Max. 1 (an MFR-TALMI unit only)
Max. 128 (including Main, MFR-RU Series, MFR-GPI and MFR-TALM
units)
10/100/1000BASE-T RJ-45 x 1
(Ethernet hub is required for Main and multiple unit connections.)
10/100BASE-TX RJ-45 x 1 (for PC or other external devices)
37-pin D-sub (female) x 1
32-input/output (user assignable)