FOR-A MFR-3232 - Tally System Settings; Assign Tally

41
4-2. Tally System Settings
The Tally System Settings page allows you to set tally control settings. (Not supported by
MFR-1000.)
IMPORTANT
If MFR-TALM is configured in the system and is assigned to a Tally Control Unit in the MU
Settings page (see Sec. 5-2), the Tally System Setting page cannot be accessed from the
Main Unit Web-based Control.
Open the Tally System Setting page from the MFR-TALM Web-based Control.
4-2-1. Assign Tally
The Assign Tally page allows you to set tally colors. No. 1 to 46 are settable for MFR-5000/
8000 and MFR-TALM. No.1 to 20 are settable for other MFR Main Units.
Parameter
Description
Tally Conditions
Select Always, GPI Input, or None.
Device Output/Color
Selects a device, and the Channel or Color.
DPColor
Selects the tally color from Red or Green.
Tally Conditions
Device Output/Color
DPColor