7
1. Overview
MFR SERIES Web-Based Control is a web-based application that gives you free access to all MFR
series control settings such as System Settings, Input and Output Settings, Tally Settings, Remote
Control Button Assignments, and crosspoint switch settings. Without the need to install software, the
system can be controlled using the web browser of a computer connected to the main unit. Settings can
be input using the MFR SERIES Web-Based Control, and setting operations can be easily performed
using the remote control panel buttons.
Font Convention
Text in bold (such as System Settings) indicates important text, application pages or buttons that
appear on the screen.
2. Starting Web-Based Control
2-1. System Requirements
To install MFR SERIES Web-Based Control, your PC must meet the following requirements.
Windows® 7 Professional SP1 (32-bit) or later
Windows® Internet Explorer 11
1024 x 768 pixel resolution or better
Must be capable of 24-bit color display
100BASE-TX/1000BASE-T, at least one port
100BASE-TX: Category 5 or better
1000BASE-T: Category 6 or Enhanced category 5
Note that only a single simultaneous connection is allowed for the MFR Web-based Control.
To Next Page
Loading...
Need help?
General
